Electronic Theatre Controls Source Four Revolution User Manual

Copyright © 2008 Electronic Theatre Controls, Inc.All Rights reserved.Product information and specifications subject to change.Part Number: 7061M1200-

iTable of ContentsETC®, Emphasis®, Expression®, Insight™, Imagine™, Focus™, Express™, Unison®, Obsession® II, ETCNet2™, EDMX™, Source Four®, Revolutio

1Basic AssemblyWARNING:Please note the following safety warnings before use:Do not mount the fixture on or near combustible surfaces.Do not operate th

2 Source Four PAR User ManualFixture informationHPL lamp tableColor frame holderThe color frame holder is equipped with a spring-loaded retaining clip

3Replacing the HPL lampA lamp must be installed before you use the fixture.Step 1: Disconnect power to the Source Four before installing the lamp.Step

4 Source Four PAR User ManualStep 4: Align the flat sides of the lamp base with the retention brackets on either side of the socket as shown in Figure

5Installing a lensStep 1: Position the fixture with the front of the unit (lens side) facing you, and tilted slightly upward. See Figure 9.Step 2: Hol

Corporate Headquarters  3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA  Tel +608 831 4116  Fax +608 836 1736London,