Electronic Theatre Controls Source Four Revolution User Manual download pdf (Page 29)

Routine Maintenance 25

Installing or removing beam containment devices and color frames:

Step 1: Push the latch on top of the scroller cartridge toward the back of the fixture head

to clear the accessory slot on the front of the cartridge.

Step 2: Insert or remove the beam containment device or color frame.

Step 3: Release the latch. It is spring-loaded and will slide back into the locked position

upon release. If the safety tether is present, attach it to the installed beam

containment device.

Gel Strings

You can change the gel string in your fixture. Replacement strings must have a minimum

of 2 frames or a maximum of 20 frames of gel media. If you are going to make or purchase

your own gel strings, follow the specifications below to ensure proper performance.

Replacing the gel string:

Step 1: Remove the scroller cartridge from the fixture by pulling the latch forward and

pulling the cartridge up out of the head. The gel string is held in tension and may

roll back after being released from the head.

Step 2: Place the cartridge on a flat surface and, if necessary, wind the gel string back

onto the right spool.

254mm

(10.0")

254mm

(10.0")

25mm

(1.0")

25mm

(1.0")

25mm

(1.0")

25mm

(1.0")

25mm

(1.0")

R 25mm

(R 1.0")

86mm

(3.38")

171mm

(6.75")

13mm

(0.5")

13mm

(0.5")

13mm

(0.5")

13mm

(0.5")

387mm

(15.25")

337mm

(13.25")

Ø6mm

(Ø.25")

Ø6mm

(Ø.25")

5mil Aluminum tape

Leader or Trailer

Optically clear

adhesive tape to

join frames and

leader/trailer

Curve exaggerated - this dimension

on either side of the gel string cannot

exceed 2.5mm (0.1”) for 2-20 gel

frame lengths

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Comments to this Manuals

No comments

Electronic Theatre Controls Source Four Revolution User Manual Page 29

Comments to this Manuals

Related products and manuals for Floodlights Electronic Theatre Controls Source Four Revolution